NEO Diamond core bit 28 mm x M14 55-308
Code: 55-308 · Brand: NEO · Accessories & bits · On order · Price on request
Ask the price on WhatsApp · Call +374 93 238766
Delivery in Yerevan in 1–2 working days · pickup from two shops · Ordering, payment and delivery · Returns and warranty
Product description
The NEO TOOLS diamond core bit with a diameter of 28 mm and an M14 thread is designed for dry work with an angle grinder and for precise drilling of holes in hard finishing materials. It performs well in porcelain stoneware, ceramics, natural stone (e.g. granite, marble) and concrete. It reaches a maximum rotational speed of 11,000 rpm. The design with a vacuum-brazed diamond coating ensures durable bonding of the grains and high heat resistance during dry drilling, while the paraffin-filled core supports cooling and makes it easier to start the hole. The M14 thread guarantees secure mounting in angle grinders, which is the standard for this type of tile and stone core bit.
Application
Ceramic tiles and porcelain stoneware: holes for plugs and screws for mounting accessories: hooks, shelves, rails, shower holders, finishing strips.
Natural stone (granite, marble): through-drilling for hardware and fixing elements: profiles, brackets, holders, small angle brackets.
Concrete: pilot mounting holes for small-diameter wall plugs/anchors and fixing points for installation clips and cable ties.
Wall and floor coverings: precise passage through the finishing layer during the installation of fittings and fixtures.
Stone or agglomerate worktops and window sills: service and mounting holes for light accessories, strips or rails.
Kitchen and bathroom areas: spot fixing of utility accessories (dispensers, holders, small shelves), where a clean start and control over the hole edge matter.
Installation work: pilot holes for routing low-voltage cables, fixing cable trays and small technical brackets.
Installation of profiles and trims: preparing fixing points in tiles, stone and concrete when finishing corners, thresholds and material joints.
Product features
diamond hole saw,
for dry work,
diamond grit,
vacuum brazed,
paraffin filling,
maximum rotational speed: 11 000 rpm.
Thread
M14.
Dimensions
diameter: 28 mm,
working length: 40 mm,
overall length: 60 mm.
Specifications
| Catalogue no. | 55-308 |
|---|---|
| Total product length | 60 |
| Number of pieces in set | 1 |
| Diameter | 28 |
| Working part length | 40 |
| For concrete | yes |
| For porcelain stoneware | yes |
| Drill chuck type | m14 thread |
| For ceramics | yes |
| Intended for dry operation | yes |
| Type of power tool accessories | hole saw |
| Hole saw type | diamond |
