METALLKRAFT Ring bending machine PRM 40 FH
Code: 3812040 · Brand: Metallkraft · Other power tools · On order · Price on request
Ask the price on WhatsApp · Call +374 93 238766
Delivery in Yerevan in 1–2 working days · pickup from two shops · Ordering, payment and delivery · Returns and warranty
Can be used horizontally and vertically for profiles and tubes with foot control
Heavy cast construction
hardened bending rolls
Shafts made of special steel, hardened and ground
Lateral straightening rollers, infinitely adjustable
All 3 rollers driven by gear
Horizontal and vertical working position
Suitable for very small bending diameters
Suitable for very small bending diameters due to orbital deliverable lower rollers
mobile control panel with two digital displays for the feed rollers
Straightening rolls are suitable for bending angle iron as standard
special accessories
Tube bending rolls
Angle bending rolls
Special straightening rollers
Profile bending rolls
Plastic rollers for soft materials
Device for twisting rods
Spiral bending tool
Specifications
| Art.-No. | 3812040 |
|---|---|
| Square tube dimensions [1] | 25 x 2 mm |
| Square tube min. bending Ø [1] | 450 mm |
| Square tube heavy axis dimensions bending Ø [1] | 30 x 15 x 2.5 mm |
| Square tube heavy axis min. bending Ø [1] | 500 mm |
| Round tube dimensions [1] | 25.4 x 2.3 mm |
| Round tube min. bending Ø [1] | 300 mm |
| Round profile dimensions [1] | 22 mm |
| Round profile min. bending Ø [1] | 200 mm |
| isosceles angle profile outside dimensions [1] | 35 x 35 x 5 mm |
| isosceles angle profile outside leg min. bending Ø [1] | 400 mm |
| isosceles angle profile inside dimensions [1] | 30 x 30 x 4 mm |
| isosceles angle profile inside leg min. bending Ø [1] | 550 mm |
| Explanations for bending performance, profile type optional | The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 |
| Square material dimensions [1] | 18 mm |
| Square material min. bending Ø [1] | 250 mm |
| Flat material light axis dimensions bending Ø [1] | 50 x 12 mm |
| Flat material light axis min. bending Ø [1] | 400 mm |
| Flat material heavy axis dimensions bending Ø [1] | 35 x 8 mm |
| Flat material heavy axis min. bending Ø [1] | 300 mm |
| UPN profile top rib dimensions [1] | 35 x 5 mm |
| T profile top rib min. bending Ø [1] | 400 mm |
| Explanation for T profile rib above | Additional spacers may be required |
| UPN profile outside rib dimensions [1] | 30 x 5 mm |
| T profile outside rib min. bending Ø [1] | 300 mm |
| UPN profile inside rib dimensions [1] | 35 x 5 mm |
| T profile inside rib min. bending Ø [1] | 300 mm |
| UPN profile outside leg dimensions [1] | UPN 40x20 mm |
| UPN profile outside leg min. bending Ø [1] | 350 mm |
| UPN profile outside leg dimensions [2] | UPN 35 x 18 |
| UPN profile outside leg min. bending Ø [2] | 500 mm |
| UPN profile inside leg dimensions [1] | U30x15 mm |
| UPN profile inside leg min. bending Ø [1] | 500 mm |
| Explanations for bending performance, profile type standard | The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 |
| Length approx. | 1050 mm |
| Width/depth approx. | 500 mm |
| Height approx. | 1250 mm |
| Weight approx. | 350 kg |
| Drive motor output | 1,1 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Shaft diameter top | 35 mm |
| Shaft diameter bottom | 35 mm |
| Roller diameter top | 137 mm |
| Roller diameter bottom | 137 mm |
| Speed | 7 m/min |
In the box
Standard bending rolls; Digital displays for feed rollers; mobile control panel; straightening rollers; substructure
