OPTIMUM Lathe TM 3610V
Code: 3403038 · Brand: Optimum · Other power tools · On order · Price on request
Ask the price on WhatsApp · Call +374 93 238766
Delivery in Yerevan in 1–2 working days · pickup from two shops · Ordering, payment and delivery · Returns and warranty
The lead screw and feed screw lathes impress with their sturdy design and easy handling
Guaranteed concentricity of the spindle nose ≤ 0.015 mm
Hardened and ground Z-axis guideway
DC 24 volt electrics
All gear wheels of the feed gear made of steel, hardened and ground, shafts on needle bearings All components are lubricated in an oil bath
Safety handwheels with disengagement function in the X and Z axes
LED machine lamp in the chip guard
Motor electrically braked
With safety device to prevent simultaneous operation of tapping and feed mechanism
Switch with life cycle calculation tested in accordance with EN ISO 13849
Lead and feed screw cover
Inductive position measuring system on the Z-axis
Magnetic tape system on the x- and Z0-axis
Specifications
| Art.-No. | 3403038 |
|---|---|
| Length approx. | 1964 mm |
| Width/depth approx. | 869 mm |
| Height approx. | 1475 mm |
| Weight approx. | 608 kg |
| Drive motor output | 3 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Flat feed range | 0.052 – 1.392 mm/rev |
| Number of flat feeds | 32 |
| Metric pitch | 0.4 – 7 mm/rev |
| Number of metric pitches | 26 |
| Type of the generated data | Usage data |
| Format of the generated data | Common, machine-readable formats such as JSON |
| Amount of data | Up to 5 MB |
| Continuous data generation in real time | Yes |
| Data storage location | On the device |
| Data access | Via physical interfaces |
| Further information | In the operating instructions or at info@stuermer-maschinen.de |
| Number of gears | 4 Steps |
| Speed range | 40 – 3000 min¯¹ |
| Speed control | Electronical |
| Spindle chuck | Camlock DIN ISO 702-2 No. 5 |
| Spindle bore/rod passage diameter | 52 mm |
| Spindle cone | MT 6 |
| Travel upper slide | 100 mm |
| Travel cross slide | 170 mm |
| Center height | 180 mm |
| Distance between center | 1000 mm |
| Swing diameter above machine bed | 360 mm |
| Swing diameter above planing slide | 225 mm |
In the box
Three-jaw lathe chuck Ø 200 mm Camlock no. 5; Fixed steady rest Ø 7 - Ø 102 mm; Rotating steady rest Ø 10 - Ø 60 mm; LED machine light; Adapter MK 6-MK 4; Non-rotating center point MK4; Quick-change steel holder SWH 3-E; Steel holder 20 x 100 type D for square chisel 18 mm; Initial machine filling with quality oil; Operating tool
