OPTIMUM Precision center lathe and draw spindle lathe OPTIturn TX 4814V
Code: 3432425 · Brand: Optimum · Other power tools · On order · Price on request
Ask the price on WhatsApp · Call +374 93 238766
Delivery in Yerevan in 1–2 working days · pickup from two shops · Ordering, payment and delivery · Returns and warranty
Meets the highest requirements in terms of technical equipment and precision
Machine bed made of heavily ribbed cast iron
One-piece machine base made of steel
High rigidity of the headstock housing thanks to heavily ribbed 25GG casting
All gear wheels of the feed gear made of hardened steel
Shafts on needle bearings, all components are lubricated in an oil bath
Hardened and ground face spindle ensures enormous accuracy and durability
High chip removal during roughing is no problem thanks to the high cutting capacity
Service-friendly removable rear panel
Energy chain for gentle cable and hose guidance
Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
Handwheels decoupled and tested in accordance with EN 23125
Two-channel safety electronics
No change wheels necessary
Switch with life cycle calculation tested in accordance with EN ISO 13849
With safety device to prevent simultaneous operation of tapping and feed mechanism
Bed guides hardened and precision ground
Electronically braked motor
Electronic feed cut-off of the Z-axis
Electric position cut-off with quadruple position stop
Three-jaw lathe chuck included as standard
Digital position indicator DPA 32 with cutting constant VSC
Specifications
| Art.-No. | 3432425 |
|---|---|
| Length approx. | 2288 mm |
| Width/depth approx. | 1050 mm |
| Height approx. | 1740 mm |
| Weight approx. | 1630 kg |
| Drive motor output | 5.5 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Longitudinal feed range | 0,05 – 0,752 mm/rev |
| Number of longitudinal feeds | 44 |
| Flat feed range | 0,025 – 0,376 mm/rev |
| Number of flat feeds | 44 |
| Metric pitch | 0,5 – 7,5 mm/rev |
| Number of metric pitches | 44 |
| Type of the generated data | Usage data |
| Format of the generated data | Common, machine-readable formats such as JSON |
| Amount of data | Up to 5 MB |
| Continuous data generation in real time | Yes |
| Data storage location | On the device |
| Data access | Via physical interfaces |
| Further information | In the operating instructions or at info@stuermer-maschinen.de |
| Number of gears | 6 Steps |
| Speed range | 20 – 2500 min¯¹ |
| Spindle chuck | Camlock DIN ISO 702-2 No. 8 |
| Spindle bore/rod passage diameter | 80 mm |
| Spindle cone | MT 7 |
| Travel upper slide | 153 mm |
| Travel cross slide | 290 mm |
| Center height | 240 mm |
| Distance between center | 1260 mm |
| Swing diameter above machine bed | 480 mm |
| Bed width | 300 mm |
In the box
Operating tool; Initial machine filling with quality oil; Three-jaw lathe chuck Ø 200 mm; Camlock no. 8; Two non-rotating centers MT6 and MT5; Quick-change holder SWH 5-B
