OPTIMUM Conventional Centre Lathe OPTIturn TX 5216 - DPA 32-3
Code: 3432442 · Brand: Optimum · Other power tools · On order · Price on request
Ask the price on WhatsApp · Call +374 93 238766
Delivery in Yerevan in 1–2 working days · pickup from two shops · Ordering, payment and delivery · Returns and warranty
meets the highest requirements in terms of technical equipment and precision
Machine bed made of heavily ribbed cast iron
One-piece machine base made of steel
High rigidity of the headstock housing due to heavily ribbed 25GG casting
Precisely machined slide
Shafts on needle bearings, all components are lubricated in an oil bath
Bed guides hardened and precision ground
All electronic controls can be reached centrally
All gear wheels of the feed gear made of hardened steel
Handwheels decoupled and tested in accordance with EN 23125
Two-channel safety electronics
Switch with life cycle calculation, tested in accordance with EN ISO 13849
Complete lead and pull spindle cover
Complete illumination of the work area
Hardened and ground face spindle ensures enormous accuracy and durability
High chip removal during roughing is no problem thanks to the high cutting capacity
Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
Service-friendly removable rear panel
No change wheels necessary
With safety device to prevent simultaneous operation of tapping and feed mechanism
Electronically braked motor
Electronic feed cut-off of the Z-axis
Electrical position switch-off with quadruple position stop
Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
Three-jaw lathe chuck included as standard
Large spindle bore
Specifications
| Art.-No. | 3432442 |
|---|---|
| Coolant pump output | 100 W |
| Length approx. | 3016 mm |
| Width/depth approx. | 1270 mm |
| Height approx. | 2217 mm |
| Weight approx. | 2470 kg |
| Drive motor output | 5.5 kW |
| Total rated value | 6.1 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Longitudinal feed range | 0,05 – 1,5 mm/rev |
| Number of longitudinal feeds | 55 |
| Flat feed range | 0,025 – 0,75 mm/rev |
| Number of flat feeds | 55 |
| Metric pitch | 0,5 - 15 mm/rev |
| Number of metric pitches | 55 |
| Imperial pitch | 60 – 2 Gg/1" |
| Number of imperial pitches | 55 |
| Diametrical pitch | 120 – 4 Gg/π |
| Number of diametrical pitches | 55 |
| Modular thread pitch | 0,25 – 7,5 mm x π |
| Number of modular thread pitches | 55 |
| Number of gears | 12 |
| Speed range | 30 – 1500 min¯¹ |
| Spindle chuck | Camlock DIN ISO 702-2 No. 8 |
| Spindle bore/rod passage diameter | 80 mm |
| Spindle cone | MT 7 |
| Chuck | MT5 |
| Quill stroke | 180 mm |
| Quill diameter | 72 mm |
| Travel upper slide | 170 mm |
| Travel cross slide | 350 mm |
| Travel carriage saddle | 1400 mm |
| Center height | 260 mm |
| Distance between center | 1600 mm |
| Swing diameter above machine bed | 520 mm |
| Swing diameter above planing slide | 324 mm |
| Turning length in bed bridge | 780 mm |
| Bed width | 350 mm |
In the box
Three jaw chucks; Reduction sleeve MK 7 / MK 5; Fixed center point MK 5 long; Fixed centering point MK 5 short; Quick change steel holder SWH 7-C (TX 5216); Quick change steel holder SWH 7-C (TX 6222); Steel holder 25 x 120 type D for square chisels; operating tool
