OPTIMUM Precision guide and drawbar turning machine OPTIturn TX 6222 - DPA 32
Code: 3432462 · Brand: Optimum · Other power tools · On order · Price on request
Ask the price on WhatsApp · Call +374 93 238766
Delivery in Yerevan in 1–2 working days · pickup from two shops · Ordering, payment and delivery · Returns and warranty
meets the highest requirements in technical equipment and precision. With digital position indicator DPA 32-3
Machine bed made of heavily ribbed cast iron
One-piece machine base made of steel
High rigidity of the headstock housing thanks to heavily ribbed 25GG casting
All gear wheels of the feed gear made of hardened steel
Shafts on needle bearings, all components are lubricated in an oil bath
Hardened and ground face spindle ensures enormous accuracy and durability
High chip removal during roughing is no problem thanks to the high cutting capacity
Service-friendly removable rear panel
Energy chain for gentle cable and hose guidance
Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
Decoupled handwheels tested in accordance with EN 23125
Two-channel right/left switch tested in accordance with EN 23125
No change wheels necessary
Switch with life cycle calculation tested in accordance with EN ISO 13849
With safety device to prevent simultaneous operation of tapping and feed mechanism
Bed guides hardened and precision ground
Electronically braked motor
Electronic feed cut-off of the Z-axis
All electronic controls can be reached centrally
Complete illumination of the work area
External coolant tank with level indicator and oil separator
Complete lead and feed spindle cover
Electric position stop with quadruple position stop
Three-jaw lathe chuck included as standard
Quick-change steel holder SWH 7-C
1 steel holder 32 x 130 type D for square chisel 25 mm
Digital position indicator DPA 32-3
TX 5216
Large spindle bore Ø 80 mm
TX 6222:
Large spindle bore Ø 105 mm
Specifications
| Art.-No. | 3432462 |
|---|---|
| Coolant pump output | 100 W |
| Length approx. | 3550 mm |
| Width/depth approx. | 1200 mm |
| Height approx. | 1830 mm |
| Weight approx. | 2800 kg |
| Drive motor output | 7,5 kW |
| Total rated value | 8.5 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Longitudinal feed range | 0,05 – 1,5 mm/rev |
| Number of longitudinal feeds | 55 |
| Flat feed range | 0,025 – 0,75 mm/rev |
| Number of flat feeds | 55 |
| Metric pitch | 0,5 - 15 mm/rev |
| Number of metric pitches | 55 |
| Imperial pitch | 60 – 2 Gg/1" |
| Number of imperial pitches | 55 |
| Diametrical pitch | 120 – 4 Gg/π |
| Number of diametrical pitches | 55 |
| Modular thread pitch | 0,25 – 7,5 mm x π |
| Number of modular thread pitches | 55 |
| Number of gears | 12 |
| Speed range | 40 – 1650 min¯¹ |
| Spindle chuck | Camlock DIN ISO 702-2 No. 8 |
| Spindle bore/rod passage diameter | 105 mm |
| Spindle cone | Ø 113 (cone 1:20) mm |
| Chuck | MT5 |
| Quill stroke | 180 mm |
| Quill diameter | 72 mm |
| Travel upper slide | 170 mm |
| Travel cross slide | 350 mm |
| Travel carriage saddle | 2000 mm |
| Center height | 310 mm |
| Distance between center | 2200 mm |
| Swing diameter above machine bed | 620 mm |
| Swing diameter above planing slide | 424 mm |
| Turning length in bed bridge | 880 mm |
| Bed width | 350 mm |
In the box
Operating tool; Initial machine filling with quality oil; Three-jaw lathe chuck Ø 315 mm Camlock no. 8; Two non-rotating centers MK5 (short/long); Quick-change toolholder SWH 7-C; Steel holder for square chisel 32 x 130 type D; Adapter Ø 113 mm-MK5
