OPTIMUM Precision guide and drawbar turning machine OPTIturn TX 6222V
Code: 3432467 · Brand: Optimum · Other power tools · On order · Price on request
Ask the price on WhatsApp · Call +374 93 238766
Delivery in Yerevan in 1–2 working days · pickup from two shops · Ordering, payment and delivery · Returns and warranty
With electronically controllable drive and digital position indicator DPA 32
Machine bed made of heavily ribbed cast iron
One-piece machine base made of steel
High rigidity of the headstock housing due to heavily ribbed 25GG casting
Precisely machined slide
Shafts on needle bearings, all components are lubricated in an oil bath
Bed guides hardened and precision ground
All electronic controls can be reached centrally
All gear wheels of the feed gear made of hardened steel
Handwheels decoupled and tested in accordance with EN 23125
Two-channel safety electronics
Switch with life cycle calculation, tested in accordance with EN ISO 13849
Complete lead and pull spindle cover
Complete illumination of the work area
Service-friendly removable rear panel
Hardened and ground face spindle ensures enormous accuracy and durability
High chip removal during roughing is no problem thanks to the high cutting capacity
Energy chain for gentle cable and hose guidance
Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
No change wheels necessary
With safety device to prevent simultaneous operation of tapping and feed mechanism
Electronic feed switch-off of the Z-axis
Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN
Electric position switch-off with quadruple position stop
Three-jaw lathe chuck included as standard
Quick-change steel holder SWH 7-C
Steel holder 32 x 130 type D for square chisel 25 mm
Large spindle bore
Specifications
| Art.-No. | 3432467 |
|---|---|
| Coolant pump output | 0,1 kW |
| Length approx. | 3605 mm |
| Width/depth approx. | 1739 mm |
| Height approx. | 1905 mm |
| Weight approx. | 2800 kg |
| Drive motor output | 11 kW |
| Total rated value | 12 kW |
| Drive power | 0.55 kW |
| Supply voltage | 400 V |
| Mains frequency | 50 Hz |
| Longitudinal feed range | 0,05 – 1,5 mm/rev |
| Number of longitudinal feeds | 55 |
| Flat feed range | 0,025 – 0,75 mm/rev |
| Number of flat feeds | 55 |
| Metric pitch | 0,5 - 15 mm/rev |
| Number of metric pitches | 55 |
| Imperial pitch | 60 – 2 Gg/1" |
| Number of imperial pitches | 55 |
| Diametrical pitch | 120 – 4 Gg/π |
| Number of diametrical pitches | 55 |
| Modular thread pitch | 0,25 – 7,5 mm x π |
| Number of modular thread pitches | 55 |
| Leading spindle | 6 mm |
| Number of gears | 2 x 3 Steps |
| Speed range | 14 – 1800 min¯¹ |
| Spindle chuck | Camlock DIN ISO 702-2 No. 8 |
| Spindle bore/rod passage diameter | 105 mm |
| Tool holder | SWH 7-C |
| Spindle cone | MT 7 |
| Chuck | MK 5 |
| Quill stroke | 180 mm |
| Quill diameter | 72 mm |
| Travel upper slide | 170 mm |
| Travel cross slide | 350 mm |
| Travel carriage saddle | 2000 mm |
| Center height | 310 mm |
| Distance between center | 2225 mm |
| Swing diameter above machine bed | 620 mm |
| Swing diameter in bed bridge | 880 mm |
| Swing diameter above longitudinal slide | 580 mm |
| Swing diameter above planing slide | 424 mm |
| Turning length in bed bridge | 231 mm |
In the box
Three-jaw lathe chuck Ø 315 mm no. 8; Non-moving centre point MK 5 long; Non-moving centre point MK 5 short; Quick-change steel holder SWH 7-C; Steel holder for square chiselel 32 x 130 type D for square chisel 25 mm; Initial machine filling with quality oil; Reducing sleeve MK 7 / MK 5; Operating tool
